4/04/2017

glass machinery

What is a non-diversity antenna? A non-diversity antenna system relies on only one antenna for radio wave reception. Several examples of non-diversity antenna include 1) a mast antenna mounted to the vehicle 2) an antenna printed on the backlite or 3) a set of wires mounted into the windshield. A non-diversity antenna will not be a combination.sd#^TDFBsgt(*&)gw456%#Tfbd
Can a break in a HUD (Heads-Up-Display) windshield be repaired or must it be replaced? A break in the HUD windshield can be repaired like a normal non-HUD windshield. If the repair area is in the HUD image area, a repair may interfere with the image causing a double or distorted image. Therefore, consideration is required to determine if the type and size of break is repairable without HUD interference.
Passivated glass refers to chemically coated glass. Many automotive glass parts are coated to achieve either the solar control characteristics or the privacy features. The coating can usually be detected by the reflective, mirror-like appearance. Sometimes these coatings will also have a color associated with them and can make the glass look blue, pink or amber. The solar coatings are used to filter out the sun's ultraviolet and infrared wavelengths while the privacy coatings filter out visible light wavelengths. The wavelengths that are filtered out by coated glass, include the wavelength spectrums that CB radios, cellular phones, automated toll readers and radar detectors operate on. Therefore, the chemically coated glass can interfere with the operation of electronic devices that require a glass-mounted antenna.
What type of glass is recommended for a glass-mounted antenna? Glass that is referred to, as BATCH glass is compatible with glass mounted antennas. Solar and privacy batch glass is not coated like the passivated glass. Instead, the raw materials that give the glass its solar or privacy characteristics are added at the time the glass is made. The raw materials are melted right in with the sand and other components that glass are constructed from. Once the glass has been made, it would not need any other treatments prior to fabrication into automotive glass parts. Batch glass is uniform throughout the thickness of the glass. Coated parts are surface treated; the surface has different properties than the core of the glass.
Are there any special hints for re-attaching the rain sensor? Make sure the glass is very clean prior to attaching the sensor. The performance of the sensors depends on the optically clear grades of doublefaced tape used for reattaching the units. These tapes also need to be clean and free of bubbles when applied to the glass. Any impurities that may be present will give a false signal to the rain sensor causing it to activate unnecessarily.
What does the term "Auto-Cancel" refer to in the NAGS catalog? The Auto Cancel notation means the electrical input to the heated backlite design is automatically canceled after a specified time and/or temperature. Most heated backlites made today are for automatic cancellation systems. However, there are a few parts such as the Isuzu Trooper backlites where a different glass heated design is required for the automatic vs. the manual systems. For example, FB4815 is for an automatic cancellation heated grid system whereas FB4816 is for a manual cancellation heated grid system. 8-What is the difference between a heavy-duty heated backglass and a standard heated backglass? The heavy-duty back glass is rated for higher amperage. The Heavy-Duty (HD) designation is predominately used on foreign cars such as Honda and Toyota vehicles. Normal domestic vehicles were rated for 22 amps whereas heated backlites in Asian vehicles were generally rated for 11 amps. Amperage relates to speed of performance. The higher the amperage, the faster the backglass will heat and clear the frost from the glass. To accommodate the US market, many foreign car manufacturers developed the HD back glasses to offer compatible defrosting performance in the US. The heavy-duty backglass are an upgrade, but it does not interchange with the standard design.
In developing our articles, I wished to help independent construction industry sub-contractors with challenges in there business. I hope you find these articles useful. The construction trades in the following business models will find the most benefit. The glass, electrical, Hvac, plumbing, landscaping and general construction. These are the
glass machinery
industries that I have the most expertise in and are related service trades. The sites in development will have many features to assist you. Buying and selling of old inventory, supplies or tools. Industry videos on new products and interviews. Articles and much more. For more information go to our first site in development [http://myglasstrades.com]. Or contact me at mike@myglasstrades.com. Thank you.
Article Source: http://www.xinglass.com/en/cpzs.asp

No comments:

Post a Comment